It is currently Fri Feb 10, 2012 11:24 pm

Welcome
Welcome to Preparing for the Future

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, , respond to polls, upload content, and access many other special features. Registration is fast, simple, and absolutely free, so please,
ucp.php?mode=register



Post new topic Reply to topic  [ 5 posts ] 
Sewing Awl
Author Message
User avatar

Joined: Thu Jul 29, 2010 10:34 am
Posts: 52
Location: The Highlands of Maine
Post Sewing Awl
I had purchased one of those wooden handled sewing awls that comes with the spool of thread that you would find at AC Moore's, Cabela's, or Tractor Supply Center several years back when I lived in Kansas City. I never used it until tonight. I had watched a couple of videos on Youtube to get the basics of working the awl.

With a little trial and error I figured it out and stitched a couple of alice-to-molle adapters together so a friend of mine could use them as a molle holder for his sheath knife.

One thing I did with my Awl was replace the thread that came with it and wound up on the spool some 65# test green spyder wire fishing line. The stuff works great and for approx $15.00 or so for 150 yards it is worth it.

Now I just need to order me some spare needles and I will be good to go.

_________________
Doc


Mon Aug 02, 2010 10:26 pm
Profile
 
   
Post Re: Sewing Awl
I don't know anything about leather work, but DH used to do it a lot (he worked at Tandy Leather for awhile). I've seen him use awls for making holes and it does seem to make things easier.


Wed Aug 11, 2010 5:46 pm
User avatar

Joined: Thu Jul 29, 2010 10:34 am
Posts: 52
Location: The Highlands of Maine
Post Re: Sewing Awl
Well this was not leather that I was working on. It was several layers of US Army Mil-Spec Nylon Webbing that is used in MOLLE Gear. I had adapted two pieces of the same part, but just orientated them in a different way. Got it all together and stitched it with this 65# test Spyerwire that you find in the fishing section of your local Wally-World. It made the job go a lot quicker.

The other job I did with it was to modify a Tactical Vest that I had gotten down in a Southern Country that I cannot talk about due to National Security reasons, but anyways there is a Tactical Vest that is a combination of LBV, MOLLE and ALICE and it had gotten into a fight with the mice and the mice won. So some repair work needed to be done on it as I used once again MIL-SPEC Nylon Webbing and Heavy Duty Mil-SPEC 1" Ladderlocks. There were 12 different areas that I was modifying and so it took me a couple of days to get the job done and even busted in two places one of the needles that came with the Speedy Stitcher. So now it is off to the wonderful world of the internet to order some spare needles.

These Speedy Stitchers or Sewing Awls do make sewing through multiple layers much easier job to do. If I can learn to use one of these things, then I am sure that other males can to.

_________________
Doc


Thu Aug 12, 2010 1:16 am
Profile

Joined: Sat Aug 07, 2010 2:18 pm
Posts: 70
Post Re: Sewing Awl
I ha one and lent it to a friend that used it on leather stitching (i believe a knife sheath), but that was after he had used a tool to make the holes. He liked it some much that he never gave it back.

I need to buy a new one, i was worried about the long term storage of the thread and now you have seemed to solve that problem.


Thu Aug 12, 2010 6:54 pm
Profile
User avatar

Joined: Thu Jul 29, 2010 10:34 am
Posts: 52
Location: The Highlands of Maine
Post Re: Sewing Awl
the first thing i did with the thread was replace it. i did not know about the quality of the materials and how it would hold up in a tactical situation. that is why i removed all of the thread that came with the stitcher and replaced it with spyderwire brand 65# test fishing line. this is very strong and durable fishing line that is more like regular sewing thread to me then fishing line.


http://www.spiderwire.com/prod.php?k=36 ... 5&u=SS-125
Spiderwire® Stealth™ Braid has mono manageability and body, but has the ultra thin diameter, superior strength, and ultimate sensitivity that you are looking for in a premium braided line. Due to it's Teflon® treated micro-fibers, it's super quiet, it flies through the guides giving you an even longer cast, and it won't cut into your rod guides. Stealth™ holds it's color better than the competition, and it's round shape reduces backlashes and resists digging-in on reels. With Spiderwire®, Nothing Gets Away!

_________________
Doc


Fri Aug 13, 2010 12:27 am
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron

Forum theme by Vjacheslav Trushkin for Free Forum/DivisionCore.
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
suspicion-preferred